More Information
The Thin Leading Edge dry verge system has been designed to create a sleek, modern finish for thin leding edge concrete tiles.
Available in 3 colours, black, grey and brown, this verge is easy to install, offering a mechanical fix and maintenance free system and providing weatherproof protection to the verge of the roof. For compatible ridge end caps for Thin Leading Edge Dry Verge Grey use grey KR977330 (Universal Angle) and KR977230 (Half Round).
Specifications
Technical Data
Batten Spacing
Maximum 345 mm
Packaging
Number of Pieces per Carton/Pack
40
Number of Pieces per Pallet
640
Weight per Piece
0.175 kg
Technical Data
Batten Spacing
Maximum 345 mm
Packaging
Number of Pieces per Carton/Pack
40
Number of Pieces per Pallet
640
Weight per Piece
0.175 kg
Technical Data
Batten Spacing
Maximum 345 mm
Packaging
Number of Pieces per Carton/Pack
40
Weight per Piece
0.175 mm
Technical Data
Batten Spacing
Maximum 345 mm
Packaging
Number of Pieces per Carton/Pack
40
Number of Carton/Pack on Pallet
16
Number of Pieces per Pallet
640
Weight per Piece
0.175 kg
Technical Data
Batten Spacing
Maximum 345 mm
Packaging
Number of Pieces per Carton/Pack
40
Number of Pieces per Pallet
640
Weight per Piece
0.175 kg
Technical Data
Batten Spacing
Maximum 345 mm
Packaging
Number of Pieces per Carton/Pack
60
Number of Pieces per Pallet
640
Weight per Piece
0.175 kg
Installation
- Tiling battens should be extended 35mm beyond the finished gable wall and be in good condition.
- If a batten end clip is being used the battens should be extended 25mm beyond the finished gable wall.
- The eaves starter piece, which is part of the eave and ridge pack, should be used to fix the first verge unit. This will need to be cut as marked to suit either the left or right hand verge.
- Position the next verge over the existing by using the small notches and slide up until it meets the front edge of the tile.
- At the apex use the ridge comb, which is found in the eave and ridge pack, to close of the underside and finish with a ridge end cap.
Area of application
- For roof pitches over 12.5°
- Suitable for most thin leading edge interlocking concrete roof tiles up to 345mm batten gauge.
Standards and Certifications
Benelux Dutch
Deutschland
Italy
Osterreich
United Kingdom
Export
