Small Slate Vent

Product Code: KG972200 KG972276

A low profile solution, which easily blends in with the roofline. While the cap is designed to avoid any build-up of debris inside the vent and reduces the build-up of mould growth in the roof space.

  • Suitable for most small man-made fibre cement or natural slate profiles
  • The vent cap avoids any build up of debris inside the vent and prevents the entry of birds and insects
  • Built in downpipe, which allows direct ventilation to the roof space. It connects directly to the flexipipe, without additional adaptors required, for soil and ventilation pipes and mechanical extraction systems
  • Available Colours:

    Klober Economy Slate Vent Slate Grey

    Compatible with:

    More Information

    The Small Slate Vent is a low profile solution, which easily blends in with the roofline, while the cap is designed to avoid any build-up of debris inside the vent. The vent helps to reduce the build-up of mould growth and structural damage in the roof space, caused by damp, poorly ventilated roofs. Additionally, this vent comes with a downpipe so that it can be used as a terminal for soil and ventilation pipes and mechanical extraction systems too. The Small Slate Vent suits most man-made fibre cement and natural slate roofs with a pitch of 20-70° and provides 4,500mm2 ventilation coverage. The Small Slate Vent is available in slate grey or black to blend in with the roof tiles.

    Specifications

    Technical Data
    Colour
    Slate Grey
    Material
    PVC
    Minimum Pitch
    20
    Ventilation Area
    4500 mm2
    Vent tile spacing 5 000 mm2
    0.9 m
    Vent tile spacing 10 000 mm2
    0.45 m
    Dimensions and Weights
    Width
    300mm
    Length
    600mm
    Depth
    75mm
    Packaging
    Number of Pieces per Carton/Pack
    10
    Number of Pieces per Pallet
    100
    Weight per Piece
    1.13 kg
    Technical Data
    Colour
    Black
    Material
    PVC
    Minimum Pitch
    20
    Ventilation Area
    4500 mm2
    Vent tile spacing 5 000 mm2
    0.9 m
    Vent tile spacing 10 000 mm2
    0.45 m
    Dimensions and Weights
    Width
    300mm
    Length
    600mm
    Depth
    75mm
    Packaging
    Number of Pieces per Carton/Pack
    10
    Number of Pieces per Pallet
    100
    Weight per Piece
    1.13 kg

    Installation

    • Position slate vent and carefully cut hole in membrane directly below vent cap position, leaving top section intact to create a flap
    • Secure flap to batten above
    • Trim the two lower slates to allow the pipe to pass through
    • Slate vent can be cut to suit 500mm x 250mm slates
    • Position and fix slate vent by centre nailing to battens and continue slating as normal

    Area of application

    • For roof pitches 20° - 70°
    • For 600mm x 300mm (24” x 12”) and 500mm x 250mm (20” x 10”) double lap fibre cement or natural slates
    • High and low level ventilation

    Standards and Certifications

    10 Year Guarantee
    10 Year Guarantee
    BS 5250 for Ventilation

    Your Free Guide to Roofing Ventilation

    Download our free Guide to Roofing Ventilation today for information on the importance of correct roof ventilation, the applicable British Standards, and how Klober's product range can support healthy roof space ventilation to prevent the build up of moisture and condensation.

    Download

    Brochure Download

    Download our latest Product Guide

    Find a stockist