More Information
The Universal 20k Tile Vent is for high-level ventilation, providing 20,000mm2 coverage thereby reducing the build-up of mould growth and structural damage in the roof space, caused by damp in poorly ventilated roofs. It also provides the perfect solution for heat recovery systems. The Universal 20k Tile Vent suits most concrete interlocking roof tiles or plain tile roofs with a minimum pitch of 17.5°. The low profile design is also available in brown, terracotta and slate grey to blend with the roof tiles.
Specifications
Technical Data
Ventilation Area
20000 mm2
Vent tile spacing 5 000 mm2
4 m
Vent tile spacing 10 000 mm2
2 m
Vent tile spacing 25 000 mm2
0.8 m
Packaging
Number of Pieces per Carton/Pack
10
Number of Pieces per Pallet
80
Technical Data
Ventilation Area
20000 mm2
Vent tile spacing 5 000 mm2
4 m
Vent tile spacing 10 000 mm2
2 m
Vent tile spacing 25 000 mm2
0.8 m
Packaging
Number of Pieces per Carton/Pack
10
Number of Pieces per Pallet
80
Technical Data
Ventilation Area
20000 mm2
Vent tile spacing 5 000 mm2
4 m
Vent tile spacing 10 000 mm2
2 m
Vent tile spacing 25 000 mm2
0.8 m
Packaging
Number of Pieces per Carton/Pack
10
Number of Pieces per Pallet
80
Installation
- Position vent tile in desired location and mark area of membrane to be cut
- Carefully cut the marked area to the bottom and sides, fold back the flap and secure to tiling batten above
- If using an adaptor for connection it is advised to connect prior to installation
- Position vent tile, nail fix to upper batten and secure the lower butyl strip on the skirt to a clean dry and dust free tile below
- Continue tiling as normal then apply cap ensuring this is firmly clipped into place
Area of application
- For roof pitches 17.5° and over
- For most traditional concrete interlocking tiles
- High and low level ventilation
Standards and Certifications