More Information
Part of Klober's Roll Fix Offering; the Roll-Fix Concrete Kit is a ventilating dry ridge and hip system best suited for concrete. It is quick and easy to install, with no special tools required. In addition to this the kit is lightweight, safe and easy to handle. Peace of mind is key, therefore the product complies with BS 8612 for performance, BS 5250 for ventilation and BS 5534 for mechanical fixing. Available in 3 colours to blend with any roof, it comes as a complete kit, including: 1 x Roll (295 x 5m) 11 x Ridge to ridge seals 11 x Stainless steel screws and washers (100mm) 11 x Clamping plates 9 x Ridge batten straps
Specifications
Packaging
Number of Pieces per Carton/Pack
1
Number of Pieces per Pallet
60
Packaging
Number of Pieces per Carton/Pack
1
Number of Pieces per Pallet
60
Packaging
Number of Pieces per Carton/Pack
1
Number of Pieces per Pallet
60
Installation
- To allow ridge ventilation, cut the underlay 30 mm short of apex on each side
- The method of fixing ridge battens will depend upon the type of roof structure. Once the ridge batten is in position, the ridge roll is rolled out along the ridge and stapled or nailed to the ridge batten
- Peel away the adhesive strip’s backing tape and push-fit the corrugated side flaps to follow the profile of the tiles and ensuring continuous contact The ridge tiles are secured by using the screw and washer provided to fix the Clamping Plate through the Ridge Seal into the ridge batten.
- Finish the ridge ends with either a Klober Ridge End Cap
- Full fixing instructions are available and included in the Roll-Fix Kit packs
Area of application
- Suits most concrete ridge tiles
- Can be used on clay ridge tiles, where lugs do not interfere. Additional fixings would be required for 300mm clay ridge tiles
- Can be used on hips however trays and clips are not included
Standards and Certifications