More Information
Thin Line Tile Vents are a cleverly designed in-line range suitable for the most popular concrete interlocking roof tiles, with a minimum pitch of 17.5° at 100mm headlap and over 22.5° at 75mm headlap. The built-in downpipe provides a direct ventilation path into the roof space, providing 7,850mm2 of ventilation coverage to help reduce the build-up of mould growth and structural damage, caused by damp, poorly ventilated roofs. While it can also be used as a terminal for soil and ventilation pipes and mechanical extraction systems too when used with an adaptor and Flexipipe. Profile-Line Thin Line Tile Vents have been specially developed to suit leading tile manufacturers, including Marley Edgemere, Russell Galloway, Lagan Elite, Quinn Lakeland Slate Range and Redland's Slate 10 range (Richmond 10, Landmark Slate 10, Saxon 10). Available in a wide variety of colours to match the roof tiles.
Specifications
Technical Data
Ventilation Area
10000 mm2
Vent tile spacing 5 000 mm2
2 m
Vent tile spacing 10 000 mm2
1 m
Vent tile spacing 25 000 mm2
0.4 m
Packaging
Number of Pieces per Carton/Pack
10
Number of Pieces per Pallet
120
Technical Data
Ventilation Area
10000 mm2
Vent tile spacing 5 000 mm2
2 m
Vent tile spacing 10 000 mm2
1 m
Vent tile spacing 25 000 mm2
0.4 m
Packaging
Number of Pieces per Carton/Pack
10
Number of Pieces per Pallet
120
Technical Data
Ventilation Area
10000 mm2
Vent tile spacing 5 000 mm2
2 m
Vent tile spacing 10 000 mm2
1 m
Vent tile spacing 25 000 mm2
0.4 m
Packaging
Number of Pieces per Carton/Pack
10
Number of Pieces per Pallet
120
Technical Data
Ventilation Area
10000 mm2
Vent tile spacing 5 000 mm2
2 m
Vent tile spacing 10 000 mm2
1 m
Vent tile spacing 25 000 mm2
0.4 m
Packaging
Number of Pieces per Carton/Pack
10
Number of Pieces per Pallet
120
Technical Data
Ventilation Area
1000 mm2
Vent tile spacing 5 000 mm2
2 m
Vent tile spacing 10 000 mm2
1 m
Vent tile spacing 25 000 mm2
0.4 m
Packaging
Number of Pieces per Carton/Pack
10
Number of Pieces per Pallet
120
Installation
- Determine the position of the tile vent; this must be in line with the tile below
- Mark a 120mm x 180mm wide rectangle and make a star cut from opposite corners
- Fold the four tabs back and upwards and ensure the top tab is secured to the batten above
- Fix the vent tile in position ensuring the fixing clip is located under the left hand interlock of the roof tile
- Continue tiling as normal
Area of application
- For roofs with a pitch over 17.5° at 100mm headlap and over 22.5° at 75mm headlap
- Suits Marley Edgemere, Russell Galloway, Lagan Elite, Quinn Lakeland Slate Range and Redland’s Slate 10 range
- High and low level ventilation
Standards and Certifications